Extra Large Layout DCC Wire Starter Kit with Soldered Code 100 Fishplates

Extra Large Layout DCC Wire Starter Kit

with Soldered Code 100 Fishplates for 00 Track

Compatible with all DCC systems including Hornby, Bachmann, Gaugemaster, NCE and Digitrax

Each kit contains:

• 20 metres Red 32/0.2 Large Track Bus Wire
• 20 metres Black 32/0.2 Large Track Bus Wire
• 24 x 300mm Red 16/0.2 Dropper Wire with soldered Code 100 fishplates
• 24 x 300mm Black 16/0.2 Dropper Wire with soldered Code 100 fishplates
• 60 Quick Splice Connectors
  ​

Should you require more wire for a larger layout please contact us and we can provide an estimate for the amount of wire required.

Additional Wire and Connectors are available, as are smaller starter kits. Please see our other products.

32/0.2 is for medium to large DCC layouts, where multiple throttles are to be used and/or any form of power booster is incorporated in the layout.

Dropper Wire is used in short lengths to link the track to the Track Bus. These are connected together using the Quick Splice Connectors.

The Quick Splice Connectors are no solder IDC type. To use, simply push the connector over the Bus Wire and push the Dropper Wire into the other hole. Close the metal splice with a pair of pliers and then fold the insulating clip over.

Dropper Wire is multi-strand 16/0.2 rated at 3A @ 70C with a 1.6mm outside diameter

Large Track Bus is multi-strand 32/0.2 rated at 6A @ 70C / 10A @ 25C with a 2.6mm outside diameter