Small Layout DCC Wire Starter Kit with Soldered Code 100 Fishplates
Small Layout DCC Wire Starter Kit with Soldered Code 100 Fishplates
Small Layout DCC Wire Starter Kit with Soldered Code 100 Fishplates

Small Layout DCC Wire Starter Kit with Soldered Code 100 Fishplates

Information

Small Layout DCC Wire Starter Kit -
with Soldered Code 100 Fishplates for 00 Track

Compatible with all DCC systems including Hornby, Bachmann, Gaugemaster, NCE and Digitrax

Each kit contains:

  • 10m Red 24/0.2 Large Track Bus Wire
  • 10m Black 24/0.2 Large Track Bus Wire
  • 12 x 300mm Red 16/0.2 Dropper Wire with soldered Code 100 fishplates
  • 12 x 300mm Black 16/0.2 Dropper Wire with soldered Code 100 fishplates
  • 30 Quick Splice Connectors
The wire included in the Starter Kit would be enough to complete a standard 8ft by 4ft railway.

Should you require more wire for a larger layout please contact us and we can provide an estimate for the amount of wire required.

Additional Wire and Connectors are available. Please see our other products.

24/0.2 is for small to medium DCC layouts, where there is no power booster.

Dropper Wire is used in short lengths to link the track to the Track Bus. These are connected together using the Quick Splice Connectors.

The Quick Splice Connectors are no solder IDC type. To use, simply push the connector over the Bus Wire and push the Dropper Wire into the other hole. Close the metal splice with a pair of pliers and then fold the insulating clip over.

Dropper Wire is multi-strand 16/0.2 rated at 3A @ 70C with a 1.6mm outside diameter

Small Track Bus wire is multi-strand 24/0.2 rated at 4.5A @ 70C with a 2.3mm outside diameter

Specifications
  • Brand:
    CM3Models
  • Product Code:
    24KFP
  • Weight:
    0.45kg
Reviews
product review overlay image

Customer reviews

No reviews left yet
Write A Review

No reviews have been left for this product, be the first to leave a review