Cart0 item(s) - £0.00

Small Layout DCC Wire Starter Kit with Soldered Fishplates

Stock Status : In Stock
Product Code : 24KFP
Product Brand : CM3Models
£17.00
Send to a friend

Small Layout DCC Wire Starter Kit -
with Soldered Fishplates

Compatible with all DCC systems including Hornby, Bachmann, Gaugemaster, NCE and Digitrax

Each kit contains:

  • 10m Red 24/0.2 Large Track Bus Wire
  • 10m Black 24/0.2 Large Track Bus Wire
  • 12 x 300mm Red 16/0.2 Dropper Wire with soldered fishplates
  • 12 x 300mm Black 16/0.2 Dropper Wire with soldered fishplates
  • 30 Quick Splice Connectors
The wire included in the Starter Kit would be enough to complete a standard 8ft by 4ft railway.

Should you require more wire for a larger layout please contact us and we can provide an estimate for the amount of wire required.

Additional Wire and Connectors are available. Please see our other products.

24/0.2 is for small to medium DCC layouts, where there is no power booster.

Dropper Wire is used in short lengths to link the track to the Track Bus. These are connected together using the Quick Splice Connectors.

The Quick Splice Connectors are no solder IDC type. To use, simply push the connector over the Bus Wire and push the Dropper Wire into the other hole. Close the metal splice with a pair of pliers and then fold the insulating clip over.

Dropper Wire is multi-strand 16/0.2 rated at 3A @ 70C with a 1.6mm outside diameter

Small Track Bus wire is multi-strand 24/0.2 rated at 4.5A @ 70C with a 2.3mm outside diameter

Write an online review and share your thoughts with other shoppers!

Be the first to review this product